Product introduction:
HA and NPG series TPE products are high-end special grades. The appearance is natural plastic particles and hardness range is ShoreA 50~75 degrees. They are non-toxic and eco-friendly materials, free of halogen, nonylphenol,Phthalates 16P,Pahs, and meet ROHS, REACH, EN71 eco-friendly testing standards.
TPE coating series Technical Data Sheet
| Physical characteristics TPE model |
HA-6602 |
HA-6652 |
HA-6658 |
| Hardness(Shore A) |
60¡À3 |
65¡À3 |
75¡À3 |
| Density£¨g/cm3£© |
1.15 |
1.15 |
1.15 |
| MFI (g/10min)(190¡æ£¬2.16kg) |
10 |
9 |
7 |
| Tensile strength(MPA) |
4.3 |
4.8 |
5.7 |
| Elongation£¨%£© |
600 |
600 |
600 |
| Molding shrinkage rate (%) |
1.3~1.6 |
1.3~1.6 |
1.3~1.6 |
| Operating temperature |
-45~+70 |
-45~+70 |
-45~+70 |
Injection parameters |
temperature(¡æ) |
200 - 230 |
200 - 230 |
200 - 230 |
| Pressure |
Low pressure |
Low pressure |
Medium pressure |
| Speed |
Medium - fast |
Medium - fast |
Medium - fast |
| Physical characteristics TPE model |
NPG-0500 |
NPG-0600 |
NPG-0700 |
| Hardness(Shore A) |
50¡À3 |
60¡À3 |
70¡À3 |
| Density£¨g/cm3£© |
1.10 |
1.10 |
1.10 |
| MFI (g/10min)(190¡æ£¬2.16kg) |
15 |
11 |
8 |
| Tensile strength(MPA) |
3.8 |
4.1 |
4.6 |
| Elongation£¨%£© |
600 |
600 |
550 |
| Molding shrinkage rate (%) |
1.3~1.6 |
1.3~1.6 |
1.3~1.6 |
| Operating temperature |
-45~+70 |
-45~+70 |
-45~+70 |
Injection parameters |
temperature(¡æ) |
200 - 230 |
200 - 230 |
200 - 230 |
| Pressure |
Medium pressure |
Medium pressure |
Medium pressure |
| Speed |
Medium - fast |
Medium - fast |
Medium - fast |
Application:
HA series is mainly used for encapsulation of PA6, PA66, and NPG series is mainly used for encapsulation of PET, PBT, PCTG, such as hardware tools, sports equipment, high-end transparent cosmetic bottles, etc.
