Product introduction:
This series are mainly super soft and high transparent TPE products, the main hardness range is ShoreA 0~10 degrees. It has good anti-aging and anti-ultraviolet performance, non-toxic and eco-friendly materials, free of halogen, nonylphenol, Phthalates16P, Pahs and meets ROHS, REACH, EN71 eco-friendly testing standards.
TPE soft rubber series Technical Data Sheet
Physical characteristics TPE model |
LE-2000 |
LE-2005 |
LE-2008 |
| Hardness(Shore A) |
0-1 |
5¡À2 |
8¡À3 |
| Density£¨g/cm3£© |
0.91 |
0.91 |
0.91 |
| MFI (g/10min)(190¡æ£¬2.16kg) |
100 |
70 |
50 |
| Tensile strength(MPA) |
¡ª¡ª |
0.5 |
0.7 |
| Elongation£¨%£© |
¡ª¡ª |
600 |
600 |
| Molding shrinkage rate (%) |
1.3~1.8 |
1.3~1.8 |
1.3~1.8 |
| Operating temperature |
-45~+50 |
-45~+50 |
-45~+50 |
Injection parameters |
temperature(¡æ) |
155 - 200 |
155 - 200 |
155 - 200 |
| Pressure |
Low pressure |
Low pressure |
Medium pressure |
| Speed |
Medium - fast |
Medium - fast |
Medium - fast |
| Physical characteristics TPE model |
T-1000 |
T-1001 |
T-0100 |
| Hardness(Shore A) |
0 |
3¡À2 |
10¡À3 |
| Density£¨g/cm3£© |
0.91 |
0.91 |
0.91 |
| MFI (g/10min)(190¡æ£¬2.16kg) |
100 |
80.0 |
42 |
| Tensile strength(MPA) |
¡ª¡ª |
0.4 |
0.6 |
| Elongation£¨%£© |
¡ª¡ª |
600 |
600 |
| Molding shrinkage rate (%) |
1.3~1.8 |
1.3~1.8 |
1.3~1.8 |
| Operating temperature |
-45~+50 |
-45~+50 |
-45~+50 |
Injection parameters |
temperature(¡æ) |
155 - 200 |
155 - 200 |
155 - 200 |
| Pressure |
Medium pressure |
Medium pressure |
Medium pressure |
| Speed |
Medium - fast |
Medium - fast |
Medium - fast |
Application:
Mainly used to produce shock-absorbing soft contact products, such as bicycles and gel cushions, sports equipment cushions, magic underwear bra liner, adult products, etc.
