Product introduction:
BT series are highly transparent TPE products, EM series are mainly ordinary transparent TPE products.They have good anti-aging and anti-ultraviolet performance, non-toxic and eco-friendly materials, free of halogen, nonylphenol, Phthalates16P, Pahs and meets ROHS, REACH, EN71 eco-friendly testing standards. The main hardness range is ShoreA 35~75 degrees.
TPE transparent series Technical Data Sheet
Physical characteristics TPE model |
BT-0350 |
BT-0450 |
BT-0550 |
BT-0650 |
BT-0750 |
Hardness(Shore A) |
35¡À3 |
45¡À3 |
55¡À3 |
65¡À3 |
75¡À3 |
Density£¨g/cm3£© |
0.92 |
0.92 |
0.92 |
0.92 |
0.92 |
MFI (g/10min)(190¡æ£¬2.16kg) |
30 |
25 |
20 |
15 |
10.0 |
Tensile strength(MPA) |
1.5 |
2.2 |
2.6 |
3.5 |
4.5 |
Elongation£¨%£© |
600 |
600 |
600 |
600 |
600 |
Molding shrinkage rate (%) |
1.3~1.8 |
1.3~1.8 |
1.3~1.8 |
1.3~1.8 |
1.3~1.8 |
Operating temperature |
-45~+70 |
-45~+70 |
-45~+70 |
-45~+70 |
-45~+70 |
Injection parameters |
temperature(¡æ) |
160 - 180 |
170 - 190 |
170 - 190 |
170 - 190 |
170 - 190 |
Pressure |
Low pressure |
Low pressure |
Medium pressure |
Medium pressure |
Medium pressure |
Speed |
Medium - fast |
Medium - fast |
Medium - fast |
Medium - fast |
Medium - fast |
Physical characteristics TPE model |
EM-0350 |
EM - 0450 |
EM-0550 |
EM-0650 |
EM-0750 |
Hardness(Shore A) |
35¡À3 |
45¡À3 |
55¡À3 |
65¡À3 |
75¡À3 |
Density£¨g/cm3£© |
0.89 |
0.89 |
0.89 |
0.89 |
0.89 |
MFI (g/10min)(190¡æ£¬2.16kg) |
20 |
22 |
22 |
18 |
15 |
Tensile strength(MPA) |
1.8 |
2.1 |
3.4 |
4.5 |
5.4 |
Elongation£¨%£© |
600 |
600 |
600 |
600 |
600 |
Molding shrinkage rate (%) |
1.3~1.8 |
1.3~1.8 |
1.3~1.8 |
1.3~1.8 |
1.3~1.8 |
Operating temperature |
-45~+70 |
-45~+70 |
-45~+70 |
-45~+70 |
-45~+70 |
Injection parameters |
temperature(¡æ) |
180 - 200 |
180 - 200 |
180 - 200 |
180 - 200 |
180 - 200 |
Pressure |
Medium pressure |
Medium pressure |
Medium pressure |
Medium pressure |
Medium pressure |
Speed |
Medium - fast |
Medium - fast |
Medium - fast |
Medium - fast |
Medium - fast |
Application:
BT series are mainly used for indoor high-transparent products; EM series are mainly used for outdoor transparent products, such as toys and various daily necessities.